Ipv6 Mld Ssm-Map Enable - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 mld ssm-map enable

[ no ] ipv6 mld ssm-map enable
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables SSM mapping on the router. SSM mapping statically assigns sources to
Description
MLDv1 groups. You must use SSM mapping for MLDv1 hosts to interoperate with
PIM SSM. SSM mapping allows the router to use a statically configured list to translate
<*,G> memberships to <S,G> memberships. The no version disables the SSM
map.
NOTE: To operate correctly, the static source addresses configured with the ipv6
mld ssm-map static command must fall within the configured PIM SSM range.
Privileged Exec, User Exec
Mode
1052
ipv6 mld ssm-map enable