Mpls Ldp Graceful-Restart Timers Max-Recovery - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls ldp graceful-restart timers max-recovery

mpls ldp graceful-restart timers max-recovery seconds
Syntax
no mpls ldp graceful-restart timers max-recovery
Command introduced in JUNOSe Release 7.1.0.
Release Information
Specifies the maximum length of time that the router waits for its neighbor to
Description
complete a graceful LDP restart after the LDP session is reestablished. The no version
restores the default value, 120 seconds.
Options
Global Configuration
Mode
1362
mpls ldp graceful-restart timers max-recovery
seconds Number of seconds in the range 15–600