Ipv6 Pim Sparse-Mode - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 pim sparse-mode

[ no ] ipv6 pim sparse-mode
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables PIM in sparse mode on an interface. The no version disables PIM in sparse
Description
mode on an interface.
Interface Configuration
Mode
1098
ipv6 pim sparse-mode