Copy - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

copy

copy [ sourcePath ]sourceFilename [ destinationPath ]destinationFilename [ force ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
hostName and deviceName variables added in JUNOSe Release 7.2.0.
Copies a local or network file. There is no no version.
Description
NOTE: You cannot change the extension of a file, for example, from .mac to .scr.
You can copy software release (.rel) files only to the router (download); you cannot
copy them from the router (upload). See Copying and Redirecting Files in the JUNOSe
System Basics Configuration Guide, for detailed information on file type usage with
the copy command.
Options
sourcePath Path to the source in the format:
hostName: | deviceName: | /incoming/subdirectory/ | /outgoing/subdirectory/
hostName: Name of the network host
deviceName: Name of the device specifying a flash card slot
disk0 Specifies flash card slot 0 on the primary SRP module; if no device
is specified for the primary SRP module, then disk0 is used
disk1 Specifies flash card slot 1 on the primary SRP module; source and
destination file types must be .dmp; supported only on the E120 and E320
routers
standby Specifies flash card slot 0 on the standby SRP module for backward
compatibility
standby-disk0 Specifies flash card slot 0 on the standby SRP module
standby-disk1 Specifies flash card slot 1 on the standby SRP module; source
and destination file types must be .dmp; supported only on the E120 and
E320 routers
incoming Specifies the router's incoming FTP directory
subdirectory Name of a subdirectory on the router's FTP server. If the
subdirectory does not exist, the router creates it.
outgoing Specifies the router's outgoing FTP directory
sourceFilename Name of the the source file
destinationPath Path to the destination in the format:
networkPath | /incoming/subdirectory | /outgoing/subdirectory
Chapter 4: C Commands
465
copy