Ip-Address - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ip-address

ip-address ipAddress
Syntax
[ no ] ip-address
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the IP address parameter for a user entry in the local user database. The
Description
no version deletes the IP address parameter from the user entry.
ipAddress IP address in 32-bit dotted decimal format (for example, 192.56.32.2)
Options
Local User Configuration
Mode
739
ip-address