Ipv6 Dos-Protection-Group - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 dos-protection-group

ipv6 dos-protection-group groupName
Syntax
no ipv6 dos-protection-group
Command introduced in JUNOSe Release 8.1.0.
Release Information
Attaches an IPv6 denial of service (DoS) protection group to an interface. The no
Description
version removes the attachment of the DoS protection group from the interface.
Options
Interface Configuration
Mode
1026
ipv6 dos-protection-group
groupName Name of the DoS protection group; string of up to 31 alphanumeric
characters