Match As-Path - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

match as-path

match as-path listName [ listName ]*
Syntax
no match as-path [ listName ]*
Command introduced before JUNOSe Release 7.1.0.
Release Information
Matches a BGP AS path access list. The no version removes the match clause from
Description
a route map unless you specify a value, in which case only that value is removed
from the match clause.
Options
Policy List Configuration, Route Map Configuration
Mode
1276
match as-path
listName Name of an AS path access list; string of up to 32 characters
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line