Monitor Vlan Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

monitor vlan interface

monitor vlan interface interfaceType interfaceSpecifier
Syntax
[ interfaceType interfaceSpecifier ]* [ load-interval seconds ] [ display-time-of-day ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Displays bit rate and packet rate statistics over a specified time interval for one or
Description
more VLAN subinterfaces. There is no no version.
Options
Privileged Exec, User Exec
Mode
interfaceType One of the following interface types listed in Interface Types and
Specifiers on page 5
atm
fastEthernet
gigabitEthernet
lag
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
seconds Number of seconds in the range 5–30 that specifies the time interval
at which the router calculates bit rates and packet rates for the specified VLAN;
default value is 5 seconds
display-time-of-day Sets time at which the router calculates the bit rate and
packet rate statistics for the current interval
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Chapter 13: M Commands
1333
monitor vlan interface