Isis Retransmit-Throttle-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

isis retransmit-throttle-interval

isis retransmit-throttle-interval milliseconds
Syntax
no isis retransmit-throttle-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the amount of time between retransmissions of any IS-IS LSPs on a
Description
point-to-point interface. The no version restores the default value, 33 milliseconds.
Options
Interface Configuration, Subinterface Configuration
Mode
milliseconds Number of milliseconds in the range 0–65535; the minimum delay
between LSP retransmissions on the interface
Chapter 10: I Commands
isis retransmit-throttle-interval
1137