Controller Sonet - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

controller sonet

controller sonet interfaceSpecifier
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Selects an interface on which you want to configure SONET or SDH. There is no no
Description
version.
Options
Global Configuration
Mode
462
controller sonet
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5