Ip Dhcp-External Recreate-Subscriber-Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip dhcp-external recreate-subscriber-interface

[ no ] ip dhcp-external recreate-subscriber-interface
Syntax
Command introduced in JUNOSe Release 9.2.0.
Release Information
Configures the DHCP external server application to delete and re-create the existing
Description
dynamic subscriber interface after a bound DHCP client extends its IP address lease
by restarting the DHCP discovery process on its primary IP interface instead of by
initiating the DHCP renewal process on its dynamic subscriber interface. This
command is specific to a virtual router. The no version restores the default behavior,
which preserves the dynamic subscriber interface after a bound client restarts the
discovery process on its primary IP interface.
Global Configuration
Mode
Related Topics
Preservation of Dynamic Subscriber Interfaces with DHCP External Server
Overview
Configuring DHCP External Server to Control Preservation of Dynamic Subscriber
Interfaces
ip dhcp-external recreate-subscriber-interface
Chapter 10: I Commands
765