L2Tp Ignore-Transmit-Address-Change - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

l2tp ignore-transmit-address-change

[ no ] l2tp ignore-transmit-address-change [ ip-address | udp-port ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
ip-address and udp-port keywords added in JUNOSe Release 7.1.0.
Specifies that E Series routers ignore address changes in
Description
Start-Control-Connection-Reply (SCCRP) control packets received from the remote
endpoint. If you do not include a keyword, the router ignores the entire address
change. The no version restores the default, which causes the router to accept address
changes in response to SCCRP packets.
Options
Global Configuration
Mode
ip-address Ignores only IP address changes
udp-port Ignores only UDP port number changes
Chapter 12: L Commands
l2tp ignore-transmit-address-change
1179