Ipv6 Ospf Retransmit-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipv6 ospf retransmit-interval

ipv6 ospf [ processId ] retransmit-interval retransInterval
Syntax
no ipv6 ospf [ processId ] retransmit-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the time between LSA retransmissions for the interface when an
Description
acknowledgment for the LSA is not received. The no version restores the default
value.
Options
Interface Configuration, Subinterface Configuration
Mode
processId Integer in the range 1–65535
retransInterval Number in the range 0–3600 seconds; default value is 5 seconds
Chapter 10: I Commands
ipv6 ospf retransmit-interval
1087