Ip Pim Bsr-Candidate - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip pim bsr-candidate

ip pim bsr-candidate interfaceType interfaceSpecifier
Syntax
[ hashMaskLen [ priority priority ] ] [ period bootstrapPeriod ]
no ip pim bsr-candidate
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines a router as a bootstrap router (BSR) candidate. The no version disables the
Description
router BSR candidacy.
Options
Global Configuration
Mode
896
ip pim bsr-candidate
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see "Interface Types and Specifiers" on page 5. The autoRP announcement
messages will contain the IP address for this interface.
hashMaskLen Length (up to 32 bits) of the hash mask length field sent in BSMs
that the router originates; default value is 30 bits
priority Value in the range 0–255 of the BSR-Priority field of BSMs that the
router originates; default value is 0
bootstrapPeriod Interval in the range 1–65535 seconds at which the BSR sends
bootstrap messages; default value is 60 seconds