Excess-Burst - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

excess-burst

excess-burst { size | millisecond milliseconds }
Syntax
no excess-burst
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets amount of bandwidth allocated to accommodate a packet in progress when the
Description
rate is in excess of the burst. The no version restores the default value, 0.
Options
Rate Limit Profile Configuration
Mode
Related Topics
size Amount of bandwidth allocated; in the range 0–4294967295
milliseconds Milliseconds in the range 1–10000
Creating a Two-Rate Rate-Limit Profile
Chapter 6: E Commands
609
excess-burst