Interface Tunnel - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

interface tunnel

[ no ] interface tunnel interfaceSpecifier [ transport-virtual-router vrName ]
Syntax
[ ipsec-transport ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates a tunnel interface for use by DVMRP, GRE, IPSec, or MPLS. You can specify
Description
that the tunnel be established in the routing space of a virtual router other than the
current VR. If you specify another VR, all tunnel commands apply to the tunnel in
that VR. If you do not specify another VR, tunnel commands apply to the current
VR. For DVMRP and GRE tunnels, you can specify that the tunnel be protected with
IPSec in transport mode. The no version removes the tunnel interface.
Options
Global Configuration
Mode
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
vrName Name of virtual router (other than the current VR) in which the tunnel
will be established
ipsec-transport Indicates that the tunnel is protected with IPSec in transport
mode; used for GRE or DVMRP tunnels only
Chapter 10: I Commands
733
interface tunnel