Ipv6 Mld Immediate-Leave - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 mld immediate-leave

[ no ] ipv6 mld immediate-leave
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Removes an interface immediately when the router receives a leave group
Description
membership message from the host associated with this interface. The no version
restores the default situation, in which the router issues query messages to multicast
groups and removes an interface if the associated host does not return a group
membership report within a certain length of time.
CAUTION: Issue this command only on MLDv1 interfaces to which one MLD client
is connected. Do not issue this command to interfaces to which more than one MLD
client is connected.
Interface Configuration, Profile Configuration
Mode
1042
ipv6 mld immediate-leave