Ip Nfs - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip nfs

ip nfs { source-address ipAddress
Syntax
| source-interface interfaceType interfaceSpecifier }
no ip nfs { source-address | source-interface }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the E Series interface that the current virtual router uses to exchange NFS
Description
communications with an NFS server. The no version prevents this interface from
sending or receiving NFS communications for the current virtual router.
Options
Global Configuration
Mode
ipAddress IP address of an E Series interface that sends and receives NFS
communications
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Chapter 10: I Commands
879
ip nfs