Interface-Event-Disable - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

interface-event-disable

[ no ] interface-event-disable
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies that RIP does not purge the routing table on a RIP interface that has been
Description
brought down. The no version restores the default condition, wherein RIP does purge
the routing table on an interface after a down event.
Address Family Configuration, Router Configuration
Mode
720
interface-event-disable