Local-Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

local-interface

local-interface { interfaceType interfaceSpecifier | ipAddress ipAddressMask }
Syntax
no local-interface
Command introduced before JUNOSe Release 7.1.0.
Release Information
Maps a domain name to a loopback interface. The no version deletes the mapping
Description
to the user domain name.
NOTE: In Domain Map Configuration mode, this command is replacing the deprecated
loopback command for mapping a domain name to a loopback interface. The
loopback command may be removed completely from the Domain Map Configuration
mode in a future release.
Options
Domain Map Configuration
Mode
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
ipAddress IP address of the loopback interface
ipAddressMask IP address mask of the loopback interface
Chapter 12: L Commands
1233
local-interface