Flash-Disk Compare - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

flash-disk compare

flash-disk compare { all | configuration }
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Performs a checksum validation that compares the contents of the NVS file system
Description
on the primary SRP module with the contents of the NVS file system on the redundant
SRP module, and detects any differences. The command validates only those files
that are synchronized between the primary and redundant SRP modules; it does not
validate log files, core dump files, and other files that are excluded from the system
synchronization process. There is no no version.
Options
Privileged Exec
Mode
all Compares all files in NVS; this option can take several minutes to complete
configuration Compares only configuration files; this option takes less time to
complete because it compares only a subset of the files in the NVS file system
Chapter 7: F Commands
631
flash-disk compare