Ip Igmp Promiscuous - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip igmp promiscuous

ip igmp promiscuous { on | off }
Syntax
no ip igmp promiscuous
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables the specified interface to accept IGMP reports from hosts on any subnet.
Description
The no version specifies that an IGMP interface should use the Router Configuration
mode setting (see the igmp promiscuous command) to determine from which subnets
it can accept IGMP reports.
Options
Interface Configuration, Profile Configuration
Mode
826
ip igmp promiscuous
on Enables the interface to accept IGMP reports from hosts on any subnet
off Allows the interface to accept IGMP reports only from hosts on subnets
associated with this interface