Mpls Ldp Deaggregate - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 13: M Commands

mpls ldp deaggregate

[ no ] mpls ldp deaggregate
Syntax
Command introduced in JUNOSe Release 8.1.0.
Release Information
Configures LDP to bind each prefix to a separate label on the current virtual router.
Description
The no version enables LDP to aggregate multiple prefixes to be bound to the same
label.
Global Configuration
Mode
1355
mpls ldp deaggregate