Mpls Reoptimize - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

mpls reoptimize

mpls [ traffic-eng ] reoptimize [ interfaceType interfaceSpecifier ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Performs an immediate check for better paths for all existing LSPs. There is no no
Description
version.
Options
Privileged Exec, User Exec
Mode
traffic-eng Specifies optional keyword for compatibility with non–E Series
implementations
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Chapter 13: M Commands
1401
mpls reoptimize