Ip Disable-Forwarding - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ip disable-forwarding

[ no ] ip disable-forwarding
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Disables forwarding of packets on the SRP Ethernet interface to maintain router
Description
performance. The no version enables forwarding of packets on the SRP Ethernet
interface. You see an error message if you try to set this command for interfaces
other than the SRP Ethernet interface.
Interface Configuration, Subinterface Configuration
Mode
781
ip disable-forwarding