L2Vpn Site-Range - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

l2vpn site-range

l2vpn l2VpnName site-range siteRange
Syntax
no l2vpn l2VpnName site-range
Command introduced in JUNOSe Release 8.1.0.
Release Information
Configures the maximum number of customer sites that can participate in the
Description
specified VPWS L2VPN. In a VPWS L2VPN configuration, each customer site is
represented by a customer edge (CE) device located at the edge of the customer's
network. The no version restores the default site range, 1.
Options
Global Configuration
Mode
Related Topics
l2VpnName Name of the VPWS instance
siteRange Maximum number of sites that can participate in the VPWS domain,
in the range 1–65535; default value is 1
Configuring an L2VPN Instance in the JUNOSe BGP and MPLS Configuration Guide
Chapter 12: L Commands
1207
l2vpn site-range