Mpls Lsp Retry-Time - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls lsp retry-time

mpls lsp retry-time retryTime
Syntax
no mpls lsp retry-time
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the interval in seconds between attempts to set up an LSP for RSVP-TE after
Description
a failure other than one due to no available route. The no version restores the default
value, 5 seconds.
Options
Global Configuration
Mode
1386
mpls lsp retry-time
retryTime Interval in the range 1–60