Mpls Ldp Link-Hello Disable - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 13: M Commands

mpls ldp link-hello disable

[ no ] mpls ldp link-hello disable
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Suppresses the transmission of LDP link hello messages. This command requires the
Description
use of targeted hello messages to form LDP peer adjacencies. The noversion restores
the default condition, where the LSR sends multicast link hello messages.
Interface Configuration
Mode
1367
mpls ldp link-hello disable