Mpls Traffic-Eng - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

mpls traffic-eng

mpls traffic-eng level-1 | level-2
Syntax
no mpls traffic-eng level-1 | level-2
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables flooding of MPLS traffic-engineering link information into the specified IS-IS
Description
level. Flooding is disabled by default. The no version disables flooding.
Options
Router Configuration
Mode
level-1 Floods IS-IS level 1
level-2 Floods IS-IS level 2
Chapter 13: M Commands
1425
mpls traffic-eng