Ethernet Dos-Protection-Group - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ethernet dos-protection-group

ethernet dos-protection-group groupName
Syntax
no ethernet dos-protection-group
Command introduced in JUNOSe Release 8.1.0.
Release Information
Attaches an Ethernet denial of service (DoS) protection group to an interface. The
Description
no version removes the attachment of the DoS protection group from the interface.
Options
Interface Configuration
Mode
580
ethernet dos-protection-group
groupName Name of the DoS protection group; string of up to 31 alphanumeric
characters