Ip Multicast-Routing Bandwidth-Map - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip multicast-routing bandwidth-map

ip multicast-routing bandwidth-map routeMapName
Syntax
no ip multicast-routing bandwidth-map
Command introduced in JUNOSe Release 7.1.0.
Release Information
Enables the QoS adjust function on the router. The no version disables the QoS adjust
Description
function on the router.
Options
Global Configuration
Mode
866
ip multicast-routing bandwidth-map
routeMapName Name of the route map you want to use for the bandwidth map