Ip Flow-Aggregation Cache - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip flow-aggregation cache

[ no ] ip flow-aggregation cache [ as | destination-prefix | prefix | protocol-port |
Syntax
source-prefix ]
Command introduced in JUNOSe Release 8.1.0.
Release Information
Creates an aggregation cache and accesses Flow Cache Configuration mode. The no
Description
version removes the aggregation cache and its configuration.
Options
Flow Cache Configuration, Global Configuration
Mode
800
ip flow-aggregation cache
as Specifies autonomous system aggregation
destination prefix Specifies destination prefix aggregation
prefix Specifies prefix aggregation
protocol-port Specifies protocol port aggregation
source-prefix Specifies source prefix aggregation