Isis Hello-Multiplier - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

isis hello-multiplier

isis hello-multiplier multiplier [ level-1 | level-2 ]
Syntax
no isis hello-multiplier [ multiplier | level-1 | level-2 ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the number of IS-IS hello packets a neighbor must miss before the router
Description
declares the adjacency to be down. The no version restores the multiplier default
value, 3.
Options
Interface Configuration, Subinterface Configuration
Mode
multiplier Value (in the range 3–1000) that the router uses as the hello-multiplier
when calculating the advertised hold time. The default multiplier value is 3.
level-1 Sets the hello-multiplier independently for level 1 adjacencies
level-2 Sets the hello-multiplier independently for level 2 adjacencies
Chapter 10: I Commands
1127
isis hello-multiplier