Ip Ospf Network - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip ospf network

ip ospf network { broadcast | non-broadcast | point-to-point }
Syntax
no ip ospf network
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the OSPF network type to something other than the default for the network
Description
medium. The no version restores the default value for the medium.
Options
Interface Configuration, Subinterface Configuration
Mode
broadcast Sets the network type to broadcast
non-broadcast Sets the network type to NBMA
point-to-point Sets the network type to point-to-point
Chapter 10: I Commands
889
ip ospf network