Ip Dvmrp Accept-Filter - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip dvmrp accept-filter

[ no ] ip dvmrp accept-filter listName1 [ distance ] neighbor-list listName2
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Filters incoming DVMRP reports in accordance with a standard IP access list. The
Description
no version disables the filter.
Options
Interface Configuration
Mode
786
ip dvmrp accept-filter
listName1 Name of the IP access list. If the name is 0, the interface accepts all
destinations. You can specify a simple or extended access list; with an extended
access list you can specify an address and a subnet mask.
distance Number in the range 0–255; default value is 0; the distance associated
with the DVMRP route when the router determines the RPF interface for the
source of a multicast packet
listName2 Name of an access list containing the neighbors from which the
router will accept reports. If the name is 0, the interface accepts destinations
from all its neighbors.