Ipv6 Rpf-Route - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 rpf-route

ipv6 rpf-route [ vrf vrfName ] ipv6Address/addressMask
Syntax
{ nextHopIpv6Address | interfaceType interfaceSpecifier } [ distance ]
no ipv6 rpf-route [ vrf vrfName ] ipv6Address/addressMask
[ nextHopIpv6Address | interfaceType interfaceSpecifier ] [ distance ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
vrf keyword and vrfName variable added in JUNOSe Release 7.2.0.
Customizes static IPv6 routes that the router can use to verify source addresses in
Description
multicast packets. The no version removes the static route.
Options
Global Configuration
Mode
1116
ipv6 rpf-route
vrfName Name of the VRF; string of 1–32 alphanumeric characters
ipv6Address IPv6 address of the destination network
addressMask Subnet mask for the destination network
nextHopIpv6Address IPv6 address of the next hop
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
distance Number in the range 0–255 that indicates the preference for this route