Distribute-Domain-Wide - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 5: D Commands

distribute-domain-wide

[ no ] distribute-domain-wide
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Increases the granularity of routing information within an IS-IS domain by allowing
Description
routes to be distributed from level 2 to level 1. This results in more accurate routing
between level 1 areas. The no version disables the command.
Router Configuration
Mode
531
distribute-domain-wide