Ip-Hint - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip-hint

ip-hint { enable | disable }
Syntax
no ip-hint
Command introduced before JUNOSe Release 7.1.0.
Release Information
When enabled, the E Series router preallocates an IP address for the remote (B-RAS)
Description
user before calling authentication. The address is then passed as a hint in the
authentication request to the RADIUS server. The no version disables the feature.
Options
Domain Map Configuration
Mode
808
ip-hint
enable Specifies the feature
disable Disables the feature; this is the default setting