Ip Dhcp-Capture - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip dhcp-capture

ip dhcp-capture { all | receive | transmit } [ priority { low | high } ]
Syntax
no ip dhcp-capture { all | receive | transmit }
Command introduced in JUNOSe Release 7.3.0.
Release Information
Configures the E Series router to capture and log DHCP packet information for an
Description
interface. By default, DHCP packet information is not captured. The no version
restores the default behavior.
Options
Interface Configuration
Mode
762
ip dhcp-capture
all Captures received and transmitted packets
receive Captures received packets
transmit Captures transmitted packets
low Captured packets arrive with low priority; the default priority
high Captured packets arrive with high priority