L2Tp Shutdown Tunnel - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2tp shutdown tunnel

[ no ] l2tp shutdown tunnel { destinationName |
Syntax
[ virtual-router vrName ] ip ipAddress tunnelName }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Closes all sessions in a tunnel, and prevents the creation of new sessions in that
Description
tunnel. This command works in conjunction with the l2tp drain tunnel command.
Both commands affect the status of the administrative state of L2TP on the tunnel;
the l2tp shutdown tunnel command sets the administrative state to disabled. The
no version enables the creation of new sessions in that tunnel.
Options
Global Configuration
Mode
1190
l2tp shutdown tunnel
destinationName Name the router assigns to the LNS
vrName—Name of the virtual router on which the tunnel exists
ipAddress IP address of the LNS
tunnelName Name of the tunnel