Disable - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

disable

To return to User Exec mode:
Syntax
disable [ level ]
For DVMRP, RIP:
[ no ] disable
Command introduced before JUNOSe Release 7.1.0.
Release Information
When used from Privileged Exec mode, exits Privileged Exec mode and returns to
Description
User Exec mode.
When used from Router Configuration or Interface Configuration mode in the context
of a DVMRP configuration, disables DVMRP on the virtual router or interface. The
no version reenables DVMRP on the virtual router or interface.
When used from Router Configuration mode in the context of a RIP configuration,
disables RIP on the virtual router. The no version enables RIP processing on the
virtual router.
Options
Address Family Configuration (RIP), Interface Configuration (DVMRP only), Privileged
Mode
Exec, Router Configuration (DVMRP or RIP)
level—One of the following privilege levels; default value is 1
0 Allows the user to execute the help, enable, disable, and exit commands
1 Allows the user to execute commands in User Exec mode plus commands
at level 0
5 Allows the user to execute Privileged Exec show commands plus the
commands at levels 1 and 0
10 Allows the user to execute all commands except support commands,
which may be provided by Juniper Networks Customer Service
15 Allows the user to execute support commands
Chapter 5: D Commands
519
disable