Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual page 738

JUNOSe 11.1.x Command Reference Guide A to M
id
[ no ] id neighborId
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the ANCP neighbor ID in the L2C Neighbor (config-l2c-neighbor)
Description
Configuration mode. The no version removes the neighbor ID.
Options
L2C Neighbor Configuration
Mode
696
id
neighborId ANCP neighbor ID (MAC address) in the form XXXX.XXXX.XXXX