L2Tp Checksum - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2tp checksum

[ no ] l2tp checksum
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables the generation of a UDP data integrity checksum in data packets sent to an
Description
L2TP peer. The default setting is disabled. The no version disables the generation of
the checksums.
Global Configuration
Mode
1158
l2tp checksum