Hostname - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

hostname

hostname hostname
Syntax
no hostname
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the name for the router; this hostname subsequently appears in the router CLI
Description
prompt. The no version removes the hostname from the router.
NOTE: In Domain Map Tunnel Configuration mode, this command has been replaced
by the clear suspicious-control-flow-detection command and may be removed
completely from Domain Map Tunnel Configuration mode in a future release.
Options
Global Configuration
Mode
692
hostname
hostname String of up to 63 characters (no spaces)