Ipv6 Ospf Hello-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipv6 ospf hello-interval

ipv6 ospf [ processId ] hello-interval helloInterval
Syntax
no ipv6 ospf [ processId ] hello-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the interval between hello packets that the router sends on the interface.
Description
The no version resets the hello interval to its default.
Options
Interface Configuration, Subinterface Configuration
Mode
processId Integer in the range 1–65535
helloInterval Number in the range 1–65535 seconds; default value is 10 seconds
Chapter 10: I Commands
1083
ipv6 ospf hello-interval