Ipv6 Unnumbered - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 unnumbered

ipv6 unnumbered interfaceType interfaceSpecifier
Syntax
no ipv6 unnumbered
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables or disables IPv6 processing on an interface without assigning an explicit
Description
IPv6 address to that interface. The global IPv6 address of the interface, specified by
the interfaceType interfaceSpecifier values, becomes the source address in packets
that the unnumbered interface generates. The no version of the command removes
the IPv6 address from the interface.
NOTE: Enabling IPv6 on an interface automatically configures the link-local address
on an unnumbered interface.
Options
Interface Configuration, Profile Configuration
Mode
1120
ipv6 unnumbered
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5