Ip Address-Pool - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip address-pool

ip address-pool { dhcp | local | none }
Syntax
no ip address-pool
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies to the router where to get an IP address for the remote user. The no version
Description
uses the default value, local.
Options
Global Configuration
Mode
740
ip address-pool
dhcp Enables the use of a DHCP server for address allocations
local Enables the use of local address pool for address allocations
none Does not enable an IP address pool