L2C Oam - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2c oam

l2c oam { neighbor neighborName end-user-id endUserId | interface interfaceType
Syntax
interfaceSpecifier } [ count countValue ] [ timeout timeoutValue ]
Command introduced in JUNOSe Release 7.2.0.
Release Information
Triggers the access node to run a local loopback test on the specified interface. There
Description
is no no version.
Options
Privileged Exec, User Exec
Mode
1156
l2c oam
neighborName—Name of the neighbor
endUserId—Output ANCP label
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
countValue—Number of local loopback messages
timeoutValue—Time (in seconds) for the access node to wait for a loopback
response from the neighbor