Lsp-Gen-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

lsp-gen-interval

lsp-gen-interval [ level-1 | level-2 ] seconds
Syntax
no lsp-gen-interval [ level-1 | level-2 ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the minimum interval at which originated IS-IS link-state packets are generated
Description
on a per LSP basis. The no version restores the default value, 5 seconds.
Options
Router Configuration
Mode
level-1 Sets interval for level 1 only
level-2 Sets interval for level 2 only
seconds Number in the range 0–120; the minimum interval in seconds; default
value is 5 seconds
Chapter 12: L Commands
1257
lsp-gen-interval