Is-Type - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

is-type

is-type { level-1 | level-1-2 | level-2-only }
Syntax
no is-type
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the IS-IS level at which the router is to operate. The no version restores
Description
the default value, level-1-2.
Options
Router Configuration
Mode
level-1 Causes the router to act as a station router
level-1-2 Causes the router to act as both a station router and an area router;
the default setting
level-2-only Causes the router to act as an area router
Chapter 10: I Commands
1143
is-type